We thank, you very much for the patronage and co-operation extended to us all these years. We take pleasure to inform to all O.E.M , dealers & end users, that, this is a single house where all components and equipments are available for easy purchase and quick Installation at competitive price for today's market condition, and quality is assured for all items.

We here by furnish below the list of components and equipments manufactured and marketed by us.

FILTERS [sand, carbon, dual media]

FILTER UNDER BED MEDIA ACTIVATED CARBON ANTHRACITE DEFERROUS SAND FLANGE GASKETS
ION EXCHANGE PLANTS SOFTNERS D M PLANTS [standard plants] M.B.PLANTS ION EXCHANGE RESINS [softener, cation, anion, mixed bed] PP STRAINER EJECTORS CONDUCTIVITY METERS PALL RINGS RESIN TRAPS MIDDLE COLLECTORS

REVERSE OSMOSIS SYSTEM

RO MEMBRANE ALL SIZE [stockiest] DOMESTIC RO SYSTEM DOMESTIC RO MEMBRANE DOMESTIC RO PUMP&TRANSFORMER DOMESTIC RO MEMBRANE HOUSING ALL SIZE COMMERCIAL MEMBRANE [2540, 4040, brackish low energy & tap water] RO MEMBRANE HOUSING [S.S. & composite upto 50 bar] RO MEMBRANE CLEANING CHEMICAL [imported] HIGH PRESSURE PUMPS [imported & indigenous upto 60 bar] BRINE SEAL ORINGS

CONNECTORS END CAPS P.P CATRIDGE FILTER HOUSING 10" & 20" P.P WOUND CATRIDGE SPUN BOUND CATRIDGE CARBON CATRIDGE U.V.STERILIZER OZONATER DOSING PUMPS INDIGENOUS ROTO METERS TDS METER PH METER

EFFLUENT / SEWAGE TREATMENT PLANTS

TREASURY TREATMENT FILTERS AERATORS FIXED, FLOATING, DIFFUSED CLARIFIERS[all sizes] THICKNERS

LAMELLA CLARIFIER FILTER PRESS PP ELECTRO CHLORINATOR

ALL THE ABOVE ITEMS ARE SOLD IN LOOSE ALSO.

---

THE CHOICE FOR QUALITY,ACCURACY AND DURABILITY RO HIGH PRESSURE PUMP

High pressure triplexpump for brakish and sea water.    100 bar ROBUST DESIGN HIGH PRESSURE TRIPLEX PUMP FOR REVERSE OSMOSIS SYSTEM TO FEED RAW WATER INTO MEMBRANE UNDER GREAT PRESSURE.THESE PUMPS ARE 80% TO 90% ENERGY EFFICIENT FOR TO DAY'S COST CONSCIOUS. THESE PUMPS REQUIRE SIMPLE MAINTENANCE, ALL PARTS ARE EASILY ACCESSIBLE. Construction features pulley, belt operated,flexi joint Plunger sealed Single drive shaft operation Pump body in cast iron Heavy duty roller bearing Plunger in stainless steel and oxide ceramic

Hardened crank shaft pulsation dampener* [these pumps are designed to international standard and aimed to minimize pulsation effect by internal arrangement] Application Reverse osmosis system feed [tap,brakish,sea water] High pessure cleaning Hydro testing Boiler feed Many more. Package Comes in completely assembled with tefc motor, pulley,pulsation dampener, ms frame, couplings,pressure relief valve,belt,glycerine filled pressure gauge .*performance indicated are based on 95% volumetric efficiency. Pressure indicated at maximum discharge pressure. Never exceed specified rpm, pump should never run without pressure relief,safety valve.

---

COMPOSITE REVERSE OSMOSIS PRESSURE VESSEL UPTO 700 PSI.     CIRCLIP MODEL

INDIGINEOUSLY DEVELOPED STATE OF ART HIGH PRESSURE REVERSE OSMOSIS HOUSING IN COMPOSITE MATERIAL AND STAINLESS STEEL. ALL PRESSURE VESSELS ARE INDIVIUALLY TESTED TO ITS MAXIMUM PRESSURE AND CERTIFIED. AVAILABLE IN STAINLESS STEEL WITH SIDEPORT FACILITY UPTO A MAXIMUM PRESSURE OF 700PSI. *THE DESIGN OF ENDCAPS ENABLES EASY DISMANTLING AND REMOVING EVEN BY UNSKILLED PERSON AS IT IS STAINLESS STEEL EMBEDED.[*this design overcomes the imported end cap's threadworn-out frequently]ALL CIRCLIPS ARE TENSILE TESTED AND PLATED.

PRESSURE VESSELS	MATERIAL	FACILITY	MAX PRESS
4040 SINGLE ELEMENT	COMPOSITE	END PORT	40BAR
4080 DOUBLE ELEMENT	COMPOSITE	END PORT	40BAR
4040 SINGLE ELEMENT	SS	SIDE/END	50BAR
4080 DOUBLE ELEMENT	SS	SIDE/END	50BAR

PACKAGE: SUPPLIED AS PRESSURE VESSEL,END CAPS[BOTH ENDS] WITH O RING,CIRCLIP,SILICON GREASE.

---

FREE FLOW. CLEAN
MESSAGE FOR DESALINATION PROCESS

FEC DS3 MEMBRANE CLEANING CHEMICAL FOR IN ORGANICS. LOW PH FORMULATION, DESIGNED SPECIALLY TO REMOVE METAL HYDROXIDE,CALCIUM CARBONATE SALTS AND SIMILAR SCALES FROM POLYSUFONE, POLYAMIDE AND TFC MEMBRANE SURFACES. HIGHLY ADVANCED POWDER FORM HAS FOLLOWING FEATURES.

• LOW PH 3. [these replace strong acids and hazardous solvents]
• THEY ARE NON-TOXIC AND USER FREINDLY.
• COMES IN POWDER FORM CONCENTRATED AND ECONOMICAL.
• CONTAINS NO SURFACTANTS AND QUICKLY RINSED.
• HAS ORGANIC ACID BASE,DETERGANT BUILDERS ANDCHELATING AGENTS.
• LEAVES NO INTERFERE RESIDUE IN THE SYSTEM.
• LESS CONSUMPTION OF CHEMICALS. [recommended 30gm/lt]

DIRECTION OF USE

• Thoroughly check tanks, micron filter,[change if necessary] hose and piping.
• Fill up ro product water in the tank.
• Dissolve ffc ds3 30gm/lt of water to the tank capacity.
• Maintain temperature [if necessary heat the chemical] as recommended by the membrane manufacturer.
• Circulate the cleaning solution under low pressure through the membrane in the feed direction for one hour or flow rate as recommended by the membrane manufacturer.
If heavy fouling occurs do not recirculate the cleaning solution for more cycles discard the entire chemical to prevent from deposition of solids in the membrane.

GENERAL GUIDELINES FOR MEMBRANE CLEANING

MEMBRANE SIZE (inches)	NO OF MEMBRANE	MINIMUM FLOW RATE (lts/min)
2 2 2 4 4 4 4 4 8 8 8	1 2 4 1 2 4 6 8 1 3 5	6 13 23 9 16 35 55 76 16 50 80

After sufficient rinsing return the system to service. It is advised to clean the membrane by both chemicals for good result followed by one after other with intermittent flushing.

PACKING :
REPACKED IN 100,250 GMS, 1KG, 5 KG.

HANDLING :
WEAR SAFETY GLOVES, GOOGLES, RESIPRATOR. RINSE WITH PLENTY OF WATER.

---

FREE FLOW. CLEAN
MESSAGE FOR DESALINATION PROCESS

FEC DS11 MEMBRANE CLEANING CHEMICAL FOR ORGANICS. HIGH PH FORMULATION, DESIGNED SPECIALLY TO REMOVE ORGANICS, SILT AND OTHER PARTICULATE DEPOSITION FROM POLYAMIDE, POLYSULFONE AND TFC MEMBRANE SURFACES. HIGHLY ADVANCED POWDER FORM HAS FOLLOWING FEATURES.

• MODIFIED PH 3. [these replace strong soda and hazardous solvents]
• THEY ARE NON-TOXIC AND USER FREINDLY.
• COMES IN POWDER FORM CONCENTRATED AND ECONOMICAL.
• CONTAINS NO SURFACTANTS AND QUICKLY RINSED.
• HAS ALKALINE BASE,DETERGANT BUILDERS AND CHELATING AGENTS.
• LEAVES NO INTERFERE RESIDUE IN THE SYSTEM.
• LESS CONSUMPTION OF CHEMICALS. [recommended 30gm/lt]

DIRECTION OF USE

• Thoroughly check tanks, micron filter,[change if necessary] hose and piping.
• Fill up ro product water in the tank.
• Dissolve ffc ds11 30gm/lt of water to the tank capacity.
• Maintain temperature [if necessary heat the chemical] as recommended by the membrane manufacturer.
• Circulate the cleaning solution under low pressure through the membrane in the feed direction for one hour or flow rate as recommended by the membrane manufacturer.
If heavy fouling occurs do not recirculate the cleaning solution for more cycles discard the entire chemical to prevent from deposition of solids in the membrane.

GENERAL GUIDELINES FOR MEMBRANE CLEANING

MEMBRANE SIZE (inches)	NO OF MEMBRANE	MINIMUM FLOW RATE (lts/min)
2 2 2 4 4 4 4 4 8 8 8	1 2 4 1 2 4 6 8 1 3 5	6 13 23 9 16 35 55 76 16 50 80

After sufficient rinsing return the system to service. It is advised to clean the membrane by both chemicals for good result followed by one after other with intermittent flushing.

PACKING :
REPACKED IN 100,250 GMS, 1KG, 5 KG.

HANDLING :
WEAR SAFETY GLOVES, GOOGLES, RESIPRATOR. RINSE WITH PLENTY OF WATER.